Many Pilates clients want to develop lower-body strength and definition, and the reformer is a perfect piece of equipment to help them meet this goal. Strong hamstrings, gluteals, quadriceps, adductors and abductors provide power for athletic moves and functional activities. Reformer work also enhances range of motion and flexibility in the hips and pelvis, important for sustaining lower-body strength. Balanced development of strength, stability and range of motion is critical for everyday movements such as sitting, standing and walking, not to mention running and more sport-specific moves.

The lower body consists of the hips, pelvis, legs and feet. Within that grouping, the hips and pelvis are the most complex. Exercises covered here target the entire lower body; explore how working its muscles in a cohesive way produces efficient movement. Alignment, stabilization and integrated strength are the goals with these moves, which build strength, stabilization and a sculpted, lean look.

Exercise 1: Standing Leg Extension

This exercise improves quadriceps strength, overall balance and posture.
Springs. One yellow and one red.
Foot bar. Position one, low to high (depending on leg length).

Start Position

  • Stand at end of reformer facing foot bar.
  • Lift one leg and place it over foot bar with ball of foot on edge of reformer bed.
  • Place hands on hips or out to sides of shoulders.

Movement Sequence

  • Exhale: Straighten leg and push with ball of foot to press out carriage.
  • Inhale: Bend knee, slowly allowing carriage to return to start position.
  • Repeat 6-10 times; switch sides.


  • Change foot placement: Standing variations include externally turned out from hip and with heel slightly elevated throughout movement.
  • Vary arm positions: Start with elbows bent, hands in front of chest, and press arms forward, upward or downward as leg presses out carriage.
  • Do single-leg squat as carriage leg straightens.
  • Observe client’s ability to straighten carriage leg without changing position of low back. Check for proper torso alignment.

Exercise 2: Seated Leg Flexion

This exercise improves hamstring strength and encourages upright posture and alignment.
Springs. One yellow and one blue.
Foot bar: Not needed.

Start Position

  • From position four on Allegro 2 reformer, place short box behind carriage on rails (by pulleys).
  • Sit on foot bar or short box with upright posture.
  • Place each foot on carriage, heels on shoulder rests.
  • Place hands by hips or in front of chest, or hold sides.

Movement Sequence

  • Inhale: Prepare and engage abdominals to sit up taller and lighter on sit bones.
  • Exhale: Bend knees deeper, and pull carriage toward pulleys with hamstrings.
  • Repeat 10 times.


Change positions of arms and/or feet on carriage. Feet can be in parallel, turned out or turned in. Depending on start position, arms can move in unison with carriage: for example, from bent to straight, to the side, overhead, in front of chest, etc.

Look for changes in low-back placement as legs move, and cue client to keep good torso alignment.

For more exercises, please see “Lower-Body Progressions on the Reformer” in the online IDEA Library (June 2013 issue of IDEA Pilates Today). If you do not receive IDEA Pilates Today and would like to, please contact IDEA’s Inspired Service Team at (800) 999-4332, ext. 7, or (858) 535-8979, ext. 7, for more information.

Photographer: Nora St. John; Model: Lizbeth Garcia.